Technology Issues - BOLT DECODER SETTING Deniman - Nov 07, 2007 - 05:10 PM Post subject: BOLT DECODER SETTING
I have a BOLT decoder, I have install 2 dish one is for Asiasat2 and the other one is for Agila 2. Now I need to know if I need to set DiSEqC or what since there are split for two cable into one that go inside the decoder. Also I need to know if the LNB has power or not.
Can somebody let me known which configuration I need to do?
The problem is that the installer as always in china do the job not well and completly. He install the Dish and later he leave without configure the decoder, to do the configuration and let me see he use his decoder afther he leave! I was belive that also my decoder he had configure before but not!
Also for Agila 2, I need to know the frequency and the syncronization, and polarity.
Thanks in advance for help.
mat - Nov 07, 2007 - 06:54 PM Post subject:
THere is another thread in this section that gives a step by step instruction on what codes to use. Thread probably about 5 to 8 pages back by now, but titled something like "Stuffed up Decoder settings - Help"